If you’re searching for a smartphone that can withstand occasional splashes or even a brief soak in the pool, the iPhone 14 Pro Max is a solid pick. With its impressive IP68 rating, the iPhone 14 Pro Max offers robust water-resistant protection, safeguarding your device even in slightly damp environments. Keep reading to learn more about the iPhone 14 Pro Max’s waterproof capabilities and how they can benefityou.
Table of Contents
Are iPhone 14 Pro Max Waterproof
Yes, the iPhone 14 Pro Max is water-resistant to a point. It is IP68 rated for its level of resistance against dust and water. What it basically means is that the phone can resist being submerged up to 2 meters, approximately 6.5 feet, for up to 30 minutes without getting damaged.
The IP68 rating means that this phone is completely protected against dust and can survive the above-mentioned water submersion. This rating is based on international guidelines that stipulate the standard environment in which devices are tested and controlled.
The iPhone 14 Pro Max could survive an incident when it fell into a puddle or, for a short while, was splashed at the sink. Yet, it does not fall within the category where it can be used underwater for long times or even while a high-pressure water jet is aimed at it. And, according to him, if the seal is compromised or put to extremes, there is bound to be a possibility of some water getting in through the openings, such as at the charging port or the speaker grilles.
In relation to the contact of the iPhone 14 Pro Max with water, complete drying is highly recommended, and utilization should not occur until it is very dry. In cases where the phone acts differently after its exposure to water, one should look for professional help either at the Apple Store or an authorized service representative.
What do the numbers “6” and “8” in the IP68 water resistance rating mean
6″ in the IP rating system stands for dust protection. It actually means completely sealed against foreign objects and dust. That is to say, even if the machine works in an environment with high dust, the inner fragile parts are surely well protected from dust buildup that causes gradual performance decline or malfunction. It possesses ratings from 0 to 6, with 6 rated the highest level and believed to cover against all forms of dust protection.
The “8” stands for the level of resistance against water. Actually, in the IP rating system, the rating of water resistance ranges between 0 and 8, with 8 meaning that the device can be subjected to long-term immersion in water provided certain conditions are met without incurring some damage. In particular, it would mean that the equipment continued to operate with no sign of water ingress immediately after being continuously immersed in water at a certain depth (commonly 1.5 meters or deeper, depending on the manufacturer and product) for a certain time, say 30 minutes. Generally, those devices that are rated as 8 under IP would have very high capabilities for withstanding water and hence can be used in different harsh aquatic environments.
What underwater scenarios is the iPhone 14 Pro Max suitable for
Accidental water splashes:
In daily life, we may face different situations: small droplets of water jumping onto your phone while cooking in the kitchen or getting light rain outside suddenly. Most situations involving accidental splashes can be handled properly with the IP68 rating of water resistance provided by the iPhone 14 Pro Max to keep electronic components inside intact so that consumers can keep enjoying using it without worries.
Rainy Weather:
Even if users venture outdoors in rainy weather, the performance of the iPhone 14 Pro Max is good. It is adequately water-resistant, wherein light to moderate rain will not seep into the device, so users need not be afraid of rainwater seeping inside and damaging it. In cases of very heavy rain or when the phone is exposed to rain for a long time, even though the phone has a certain level of waterproofing, moving it to a dry place as soon as possible or further waterproof measures are still recommended.
Brief underwater exposure:
The iPhone 14 Pro Max is also capable of handling scenarios for shallow exposure to water, such as photo and video capture by the poolside or unintentional drops in shallow water while playing around in the water at the beach, given that the pressure underwater could be withstood for a short period. It should, however, be noted that while the phone can sustain being in water, continuous exposure or constant use while underwater does make water penetration a possibility, which is best avoided if not necessary at all.
Will the water resistance degrade over time
Of course, water resistance for the iPhone 14 Pro Max could degrade overtime or depending on usage. Here’s a detailed look at that phenomenon:
Aging of sealing rings:
Generally, the design of water-resistant gadgets involves intricate sealing systems incorporating many critical components, such as sealing rings. These rings can eventually show signs of aging after quite a period of time, depending on exposure to temperature and humidity, chemicals, and many other factors. The aged rings are incapable of providing the same tightness; thus, the losses in water resistance appear.
Wear and Impact on the Phone’s Exterior:
The phone inevitably goes through different forms of wear and tear during daily usage. Even minor scratches or dents may lead to compromising situations in which integrity of the exterior is lost, subsequentially affecting water resistance. If the collision causes any deformation or crack in the casing, most notably, it becomes more likely that moisture finds its way to the interior of the phone.
Frequent underwater usage:
Even though the iPhone 14 Pro Max is water-resistant, of course, this does not mean that you can use it underwater without any limits. The more frequently you expose the phone to water, the faster the sealing system will wear out, while at the same time mechanical shocks combined with hydrostatic pressure when the phone is under water further reduce water resistance.
Poor Activities of Maintenance:
Incorrect maintenance practices will also expose water resistance to compromise. For instance, the use of inappropriate cleaners or liquids to clean the phone can result in the corrosion of sealing components or even damage the waterproofing coats. Secondly, delays in taking action after water ingress, which should involve immediate powering off and taking it for professional repair, can also be a consequence of internal component damage, which in turn affects water resistance.
If the iPhone 14 Pro Max accidentally gets wet, how should it be properly handled
Immediately turn the phone off and remove it.
The very first thing you do when you realize your phone has landed in the water is to take it out as fast as possible from where it fell. At this point, you should not shake the telephone violently because you may end up sending water deeper into the phone. As soon as you get the phone out of the water, quickly press the power button and press down the hold button to turn the gadget off, preventing electrical current from passing through wet internal components that can cause short circuits or further damage.
Remove surface moisture.
Gently use a dry, soft cloth or tissue to wipe off the moisture on the surface of the phone. Never press too hard; you may end up forcing water deeper into the interior of the phone. At the same time, inspect and clear any collected water from the openings in the phone, such as the charging port, speakers, and microphones.
Do not turn it on or charge.
Avoid attempting to turn it on or plugging it into a charger to try charging until you are sure it is completely dry. The starting of a wet phone can lead to current flow through the moistened circuit board, causing short circuits and damage to the battery or even a fire hazard.
Let air-drying take its course or speed up the process.
Put it in a medium-temperature, dry, well-ventilated area to dry. At no point during the drying process should the method be carried out by using hair dryers or any heating elements that could directly blow onto the phone, as this may cause further damage to the interior of the phone due to its high temperatures. If possible, use professional telephone desiccants or water-absorbing pouches to help speed up the process. These can absorb moisture inside the phone, but follow the product instructions for safe and efficient usage.
Check the condition of your phone.
When the phone is absolutely dry, try to turn it on and check if it works. If it does, congratulations—you recovered your phone successfully. If the phone shows some sort of malfunctioning, like display problems, inability to boot up, or malfunctioning, then it means there was some internal damage.
Seek professional help.
In case the phone does not function well, it is advisable to directly ask the official support of Apple or its service center for help. They have more professional technicians to judge what damage has happened and provide the corresponding repair solution. Before sending it to the repair service, it would be better to back up important data in the phone first to avoid data loss during the process.