AirPods As an indispensable audio device for Apple users in daily use, AirPods often encounter the problem of the AirPods charging case not being able to charge. So, how should we fix and solve this problem? When faced with the frustrating situation of slow response of AirPods charging case, many users feel helpless. Don’t worry, as this article will provide you with a series of efficient and practical solutions to help you easily troubleshoot and repair charging issues with AirPods charging cases.
Table of Contents
How to Fix AirPods Case Not Charging
Check Charging Equipment: Check the pins on the charging port for any debris that could obstruct the case from effectively connecting to the charger. Inspect the charging cable for any breaks or kinks in the wire, and also ensure the charging brick is working properly. The charging equipment itself may be the cause, so use alternative, known-working charging cables and bricks to rule out possible problems.
Clean the charging case and earbuds: Gently clean the metal contacts and small holes inside the charging case by using a dry, lint-free, soft cloth mixed with a clean, soft-bristled brush. Make sure no dust or dirt is collected. Be cautious; do not use too much moisture or chemical cleaners, as they can spoil the charging case.
Further Updates on the Device System: Your iOS device should be up to date. Sometimes, system updates fix compatibility issues with AirPods.
Restore AirPods:
- Place your AirPods in the charging case and cover the lid.
- Wait for roughly 30 seconds and open the lid.
- On your device, navigate to “Settings” > “Bluetooth” and find your AirPods device. Tap the “i” symbol beside your device.
- Tap the “Forget This Device” option in the following interface.
- Then, re-pair the AirPods to the device and see if you can charge them.
- Note: Do this for AirPods Pro—Reset the charge case by long-pressing on the setup button at the back of the case until the indicator light flashes amber, then white.
Contact Apple Support: If none of the above methods solve the problem of an AirPod charging case not charging, then contacting Apple’s official support or visiting an Apple Authorized Service Provider for inspection and repair is recommended. Please have the purchase proof and your AirPods details ready so the staff may help you out more efficiently.
What is the reason why the indicator light on the AirPods charging case is not lit
Issues of Charging Device: Ensure that your charging cable and charging brick are in good physical condition—no exposed wires, no aging appearances, and no poor contact. If possible, try known working alternative charging cables and bricks at your disposal to be able to rule out issues with the charging equipment itself.
Charging Case Connection Issues: Ensuring the charging case is connected properly, make sure the charging cable is properly inside the charging case in the charging port and is well connected. Sometimes, the charging cable is not plugged properly or is partially in, and even in some cases, it has come loose, so the charging is delayed. You may like to try re-plugging the cable by pulling it out slightly and then making it insert again for being tight.
Faulty Charging Case: Check the interior of the charging case for any visible physical damage or blockages that may be impeding the charging port. This likely is not going to be something users can independently troubleshoot, so bypass that and go straight to contact Apple Support.
Software Problems: Sometimes, less frequently, some software issues could be inhibiting the indicator light on the charging case from lighting.
What are the reasons why the AirPods charging case runs out of battery soon after being fully charged
Battery Aging: The batteries in the AirPods case and the AirPods themselves have a gradual aging process over time, as used up. Therefore, the capacity to hold the charge of the battery diminishes, or the battery storage capacity is reduced. As a result of this, the usage time is much shortened, or charging occurs very frequently after the charging case holds a full charge.
Frequent Opening and Closing: Users often open and close the case cover, and this usually leads to frequent discharge of the charging case, which speeds the consumption of battery power. It has been observed that sometimes the user may forget to close the case cover after charging, which results in an accidental drain in batteries.
Not Enough Charging: When the AirPods or the case charging is incomplete, the batteries could further drain too fast. It could also result from the use of broken or unaligned charging cables and blocks. It ultimately results in lower charge efficiency or incorrect readings.
What are the reasons why the charging animation does not display when AirPods are placed in the charging case
Malfunction in Apple Device Connectivity: The Bluetooth connection between the Apple device and AirPods may have changed or it is merely interrupted, which could be the reason why the device cannot appropriately identify the charging status of the AirPods. Take the AirPods out of the charging case and again place them back in, making sure that they fit well in the case. Check the Bluetooth settings on the device and make sure AirPods are connected and in an available state.
Software Issues: The Apple device’s operating system may be bugged or has not been updated to its latest version, so it does not properly allow the charging animation. Make sure to get your Apple device on the newest updated OS and see if a simple reboot is going to resolve this problem.
AirPods or charging case fault: Hardware problems of AirPods or its charging case may be prohibiting the normal flow of charge or the exhibit of that charge. It is highly recommended to get in touch with Apple Support for further inspection or replacement.
Is it normal for the AirPods charging case to heat up significantly while charging
An AirPods charging case should not get too hot when charging. The batteries do, in practice, produce heat during the charging process through chemical reactions and the release of energy; by using some non-Apple-recommended charging cables or heads, excessive heat generation could be introduced during the charging process.
Solution: Use Apple-recommended charging devices and accessories for charging to ensure the safety and stability of the charger.